POSIFLEX Business Machines LCD Customer Display PD-7100 - Manual (Page 6)

1 - 2
D. Description
This LCD is a self-contained multiplexed unit which provides a simple
interface to a microprocessor system.
The display is available with one I/O connector for both the RS232
interfacing and the power supply.
This unit consists of a liquid crystal display cell and a minimal amount of
electronic hardware. All display characters and control codes can be accessed in
a 8-bit format. Primary complexity is contained within the microprocessor
software, which controls all display functions.
Data is entered serially at 9600 baud rate as default and can be changed to
19200 baud rate per jumper setting. The large characters are easily readable, and
provide comfortable short or long-term viewing.
E. Model numbers
Model Number PD-7100/7200 PD-7110/7210 PD-7120/7220
Character Format 8 x 16 or 6 x 8
16 x 16 or 8 x 16
or 6 x 8
16 x 16 or 8 x 16
or 6 x 8
Display Characters Alphanumerical
GB-Chinese or
Alphanumerical
BIG-5-Chinese or
Alphanumerical
Display Capacity 2 x 20 or 4 x 26
2 x 10 or 2 x 20 or
4 x 26
2 x 10 or 2 x 20 or
4 x 26
Command Set Epson or Noritake
IEE or Epson or
Noritake
IEE or Epson or
Noritake
User-defined
Characters
3 characters max. 3 characters max. 3 characters max.
Standard model numbers carry footnote in form of “/X” to indicate the
type of power adaptor. (ex. PD-7100/US)
A model number without such indication in purchase order will indicate
the PD and its signal cable only. A PD in this form can be applied with Posiflex
POS system.
For application with usual PC without power adaptor, please order the
power kit to supply the PD.
For application sharing power source with Posiflex POS printer, Please
order the special power cable 20863250900.