beautypg.com

Linking examples, Cab 16o link connection example (figure 14), Cab 16d link connection example (figure 15) – Peavey COBRANET AUDIO BRIDGE CAB 16D User Manual

Page 29

background image

Link Connections

Page 29

Peavey Electronics Corp

Fig. 15, CAB 16d Link Connection Example

Using the Link feature with the CAB

16d is basically the same as the other units, but there are several issues that must be con-

sidered when configuring the digital audio connections. It is not possible to “bus” or “Y” digital signals. An active distribution
method must be used or ideally, redundant digital audio should be sourced independently as shown in this example.

NOTE: Using the Link Connectors
for creating redundancy is limited to
“dual” CAB units. Where addition-
al CABs are used, additional redun-
dant units must also be added.

CAB 16o Primary

CAB 16o Secondary or “Slave”

Audio Output

CAB 16d Primary

Redundant Audio Inputs

CAB 16d Secondary or “Backup”

Redundant Audio Outputs

Network Connection

Network Connection

Fig. 14, CAB 16o Link Connection Example

This manual is related to the following products: