Pioneer MVH-P8200BT - Manual (Page 25)

Pause (pause)
1 Press M.C. to pause or resume.
Random (random play)
! Refer to Random (random play) on page 22.
Play Mode (repeat play)
1 Refer to Play Mode (repeat play) on page 18.
However, the repeat range is different from that of
moving images.
! All – Repeat all files
! Folder – Repeat the current folder
Capture (capturing an image in JPEG files)
You can capture image data and use it as wallpaper.
Images can be stored and recalled easily in this unit.
! Only one image can be stored on this unit. Old
images are overwritten with the new ones.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
3 Press M.C. to confirm the selection.
Rotate (picture rotation)
1 Press M.C. to display the setting mode.
2 Press M.C. to rotate the displayed picture 90°
clockwise.
Wide Mode (switching the wide mode)
! Refer to Wide Mode (switching the wide mode)
on page 19.
Time Per Slide (slideshow interval time setting)
JPEG files can be viewed as a slide show on this unit.
In this setting, the interval between each image can
be set.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
! 5sec – JPEG images switch at intervals of 5
seconds
! 10sec – JPEG images switch at intervals of 10
seconds
! 15sec – JPEG images switch at intervals of 15
seconds
! Manual – JPEG images can be switched
manually
3 Press M.C. to confirm the selection.
Display (display setting)
! Refer to Display (display setting) on page 19.
A/V Format (switching media file types)
! Refer to A/V Format (switching media file types)
on page 19.
Notes
! Operation is complete even if the menu is can-
celled before being confirmed.
! You can select the following functions if the
background setting on the entertainment
menu is off.
— Capture (capturing an image in JPEG
files)
— Rotate (picture rotation)
— Wide Mode (switching the wide mode)
— Display (display setting)
Introduction of operations for
playback of still images as a
slideshow
You can view still images saved to a USB/SD
as a slideshow while listening to audio from
another source.
For details about the settings, refer to
Slide Show (slide show viewing) on page 31.
Function settings
1 Press M.C. to display the function
menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Return (ending slideshow)
Ending the slideshow.
1 Press M.C. to end the slideshow.
Photo Selection (selecting photos)
En
25
English
Section
03 Operating this unit