Pentax PocketJet 3 - Manual (Page 18)

Using the Configuration Program:
• Connect an external power source, or be sure that the battery is
freshly charged.
• Assure that the Printer Driver has been installed and is functional.
• Connect the supplied USB cable between the printer and host
computer, or align the computer and printer Infrared ports.
• From the Start Menu, select Programs, select Pentax PocketJet 3,
and then select “PocketJet 3 (or 3plus) Configuration”
The application will load and will appear as follows:
FIGURE 5. Configuration Utility
If you prefer a language other than English, you may select this
first. Then, using either the ‘File’ pull-down, or the ‘Printer’
selector, you may choose the appropriate PocketJet printer.
The display above shows the parameters for the printers as they
are typically shipped in the U.S. market. These parameters
may be different in other countries or may have been specially
configured for some customers.
Configuration Options
Note: These configuration options are in some cases relevant only
where the host computer will be sending simple text data to the
printer and cannot send commands to perform these
configuration changes. Others affect the printer in all modes.
The first two items below are common to all modes.
Page 10