Pioneer DEH-P8600MP - Manual (Page 45)

Introduction of advanced
DAB tuner operation
1
2
1 Function name tag
Shows the function currently selected in
highlighted manner.
2 Function display
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL clockwise to switch be-
tween the functions in the following order:
AS (announcement support)Service Follow
(service follow)2nd (primary/secondary)
PTY (available PTY search)
# You can also switch between the functions in
the reverse order by turning MULTI-CONTROL
counterclockwise.
# To return to the frequency display, press
BAND/ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Switching the DAB display
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Service Label (service label)
Component Label (service component
label)DAB Text (dynamic label)PTY (PTY
label)Ensemble Label (ensemble label)
Note
With a service component that has no service
component label, dynamic label or PTY label,
switching to Component Label, DAB Text and
PTY is not possible.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16 you can easily store up to six services for
later recall with the touch of a button.
% When you find a service that you want
to store in memory press a preset tuning
button 16and hold until the preset num-
ber stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected service has been stored in mem-
ory.
The next time you press the same preset tun-
ing button 16 the service is recalled from
memory.
DAB tuner
En
45
English
Section
09