Introduction of advanced built-in cd player, Operation 25, Repeating play 25 – Pioneer DEH-P8600MP User Manual

Page 25: Repeating play, Built-in cd player

Introduction of advanced

built-in CD player operation

1 Function name tag

Shows the function currently selected in

highlighted manner.

2 Function display

Shows the function status.

1 Press MULTI-CONTROL to display the

main menu.

FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to se-

lect.

The function name appears on the display.

3 Turn MULTI-CONTROL to select the

function.

Turn MULTI-CONTROL clockwise to switch be-

tween the functions in the following order:

PLAY MODE (repeat play)RANDOM (ran-

dom play)SCAN (scan play)PAUSE

(pause)SEARCH MODE (search method)

TAG READ (tag display)COMP/BMX

(compression and BMX)DISC TITLE (disc

title input)

# You can also switch between the functions in
the reverse order by turning MULTI-CONTROL
counterclockwise.

# To return to the playback display, press
BAND/ESC.

Notes

! When playing audio data (CD-DA), tag display

is not effective even if you turn TAG READ
(tag display) on. (Refer to page 33.)

! When playing a CD TEXT disc, you cannot

switch to DISC TITLE. The disc title will have
already been recorded on a CD TEXT disc.

! If you do not operate the function within about

30 seconds, the display is automatically re-
turned to the playback display.

Repeating play

Repeat play lets you hear the same track over

again.

1 Use MULTI-CONTROL to select

PLAY MODE.

The function name tag PLAY MODE is high-

lighted.

2 Press MULTI-CONTROL to turn repeat

play on.

Repeat mode :ON appears in the display. The

track currently playing will play to the end and

then repeat.

# To turn repeat play off, press
MULTI-CONTROL again.

Note

If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.

Built-in CD Player

English

Section