Tuner listening to the radio 15, Listening to the radio, Tuner – Pioneer DEH-P8600MP User Manual

Page 15

Listening to the radio

1 2

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 19).

1 LOC indicator

Shows when local seek tuning is on.

2 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

3 Preset number indicator

Shows which preset has been selected.

4 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

5 Frequency indicator

Shows to which frequency the tuner is

tuned.

1 Press SOURCE to select the tuner.

Press SOURCE until you see Tuner displayed.

2 Press BAND/ESC to select a band.

Press BAND/ESC until the desired band is dis-

played, FM1, FM2, FM3 for FM or MW/LW.

3 To perform manual tuning, push

MULTI-CONTROL left or right.

The frequencies move up or down step by

step.

4 To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one

second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right you can skip stations. Seek tuning starts as
soon as you release MULTI-CONTROL.

Tuner

English

Section