Planet Technology WAP-4000A - Manual (Page 5)

PLANET WAP-4000A User Manual
- 1 -
Chapter 1 Introduction
Thank you for purchasing WAP-4000A. This device features the latest innovation wireless
technology making the wireless networking world happened. This manual guides you on how
to install and properly use the WAP-4000A in order to take full advantage of its features.
1.1 Package Contents
Make sure that you have the following items:
•
One WAP-4000A
•
One DC Power Adapter
•
One dipole antenna
•
One User’s Manual and Utility CD
•
One Quick Installation Guide
Note: If any of the above items are missing, contact your supplier as soon as
possible.
1.2 System Requirements
Before installation, please check the following requirements with your equipment.
•
Pentium Based (And Above) IBM-Compatible PC System
•
CD-ROM drive
•
Windows 98/ME/2000/XP/2003/Vista Operating System with TCP/IP protocol
1.3 Features
‧ Wireless LAN IEEE802.11g and IEEE802.11b compliant
‧ Strong network security with RADIUS authentication, and 64/128-bit WEP encryption
‧ Supports WPA (Wi-Fi Protected Access) / WPA2 (Wi-Fi Protected Access)
‧ One detachable reverse-polarity SMA connectors can connect to external antenna for
expanding connection distance
‧ Super G mode efficiently raises the data transfer rate up to 108Mbps
‧ Five operation modes selectable: AP / AP Client / Wireless Bridge / Multiple Bridge /
Repeater
‧ Auto Fall-Back Data Rate for Long-Distance Communication and Noisy Environments
‧ Adjustable antenna transmit power
‧ Features Roaming, Best Access Point Selection, Load Balancing, and Network Traffic
Filtering
‧ Provide Windows-base configuration utility and Web Configuration