Polaroid FXM-2611C - Manual (Page 25)

- 24 -
System Setup and Operation
Preparations
1. After completing your AV and power connections, press the POWER button to turn on the unit.
2. Press the Input button to display the Input menu, then press the ▲▼ button to select TV and
press the Enter button to enter TV mode. You can go on with the following setups:
Setup Setting
Tuning Band
Press the ▲▼ button to select the Tuning Band, press the Enter button to select Air or Cable.
DTV Signal
Press the ▲▼ button to select the DTV Signal, press the Enter button, the screen will display the
DTV Signal status, press the Enter button again to return to the previous menu.
Press the Menu button to enter the main
setup menu, as shown on the right:
In the menu, press the ▲▼ button to select
the Setup, and then press the ◄ or ►
button to enter the setup menu, press the
▲▼ button to select items. Press the ◄ or
► button again to return to the previous
menu. Press the Exit button to exit the setup
menu.
Auto Ch Search
Press the ▲▼ button to select the Auto Ch
Search, press the Enter button to enter the
Auto program Menu and begin auto
searching, see the right figure:
After auto-searching, the unit will exit and
memorize the programs in sequence
automatically. It will go to the first searched
channel.
When searching, press the Exit button to
exit.