Polaroid FXM-2611C - Manual (Page 24)

- 23 -
Input Source Selecting
The player incorporates multiple video modes, you can select the video mode according to the input
signal.
Press the Input button to enter the Input menu, the screen will display as below:
In the menu, press the direction button to select the video mode, press the Enter button to enter
the selected mode.
NOTE:
If you would like to receive an S-Video signal, connect the S-Video cable to the S-Video input (AV2
Composite). Also connect the red and white (audio) ends of the composite cable to AV2 (Composite).
You can not receive multiple video signals through AV2. Therefore, when using S-Video, do not
connect the yellow (video) end of the composite cable to AV2.
NOTE:
If you choose to install additional external devices (sold separately) to the back of the LCD TV using
the MGI connectors, the names of these devices will be displayed on the above screen for selection.