Pride Mobility JAZZY 1170 XL PLUS - Manual (Page 24)

24 www.pridemobility.com Jazzy 1170 XL Plus
V . C O M F O R T A D J U S T M E N T S
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the leg
rests to the side before you transfer on or off of your power
chair.
To rotate the SFRs:
1. Push in the release lever. See figure 16.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of
each footrest extension. See figure 16.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in.
To rotate the ELRs:
1. Push in release lever A. See figure 17.
2. Rotate the ELRs.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension. See figure 17.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
To adjust the ELR angle:
1. Push down release lever B. See figure 17.
2. Move the leg rest to the desired angle.
Figure 17. Elevating Leg Rests
ADJUSTMENT
SCREWS
ADJUSTMENT
SCREWS
FOOTREST
EXTENSION
SFR RELEASE
LEVER
Figure 16. Swing-away Footrest Adjustment
LEGREST
EXTENSION
RELEASE LEVER A
RELEASE LEVER B
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex key.
To adjust the foot platform angle:
1. Locate the setscrew on the underside of the foot platform.
See figure 15.
2. Turn the setscrew clockwise to raise the front of the
foot platform.
3. Turn the setscrew counterclockwise to lower the front
of the foot platform.