Pitco Frialator SG14R - Manual (Page 2)

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 • 1 509 Route 3A, Bow NH 03304, USA
(603) 225-6684 • Fax (603) 225-8472 • www.pitco.com L10-134 Rev 4 (02/07) Printed in the USA
Model FD Solstice Filter Drawer
Filter Drawer (FD) and System Solstice Models
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
5/8 [1.6]
9 [22.9]
REQUIRED TO REMOVE
MINIMUM AISLE SPACE
30 [76.2]
NOM.
12 [30.5]
34 [86.4]
NOM.
FILTER PAN 11/16 [1.7]
34 3/8 [87.3]
1 5/16 [3.3]
46 1/8 [117.2]
NOM.
10 ½
[26.7]
A
INTEGRAL
FLUE DEFLECTOR
OPTIONAL
BASKET LIFT
2. 6 FOOT (183 CM) POWER SUPPLY CORD
1. 6 FOOT (183 CM) POWER SUPPLY CORD
(NEMA 5-15 PLUG ON 115VAC UNITS ONLY)
SUPPLIED WITH UPGRADED CONTROLS
SUPPLIED WITH FILTER SYSTEM
REAR
TEE GAS
CONNECTION
4 3/8 [11.1]
21 29/32 [55.6]
2 5 1 4 L 3 8 R 7 0 6 9 2 5 1 4 L 3 8 R 7 0 6 9
INCHES [CENTIMETERS]
GAS REQUIREMENTS
Gas Rear Tee Manifold
Maximum Number of
Fryer Positions Per Manifold Rear Tee Gas Connection Location Gas Connection Size
SG14S, SG14RS,
SG14TS, SG18S,
SGBNB14, SGBNB18
4 fryer positions allowed;
include BNB unit in position count.
Default location is to the left. Connection
is field reversible to the right.
1-¼” NPT (1-¼” BSP CE AuGA) for 367 KBTU / 108 kW / 387 mJ
to 560 KBTU / 164 kW / 591 mJ.
1 “ NPT (1” BSP CE, AuGA) up to 366 kBTU / 107 kW / 386 mJ.
¾” NPT (¾” BSP CE, AuGA) for single units.
Gas Type Store Manifold Pressure* Burner Manifold Pressure *Recommended Minimum
Natural Gas 7” W.C. / 17.4 mbars / 1.75 kPa 4” W.C. / 10 mbars / 1 kPa
L.P. Gas 13” W.C. / 32.4 mbars / 3.25 kPa 10” W.C. / 25 mbars / 2.5 kPa
Check plumbing/gas codes for proper gas supply line sizing.
Clearance Information Fryer Front
Fryer Sides, Rear, Bottom
to any combustible material Fryer Flue Area
All Models 30” (76.2 cm) minimum 6” (15.2 cm)
Do not Curb Mount
Do not block or restrict the flue gasses from flowing into
ventilation system.
ELECTRICAL REQUIREMENTS
Options Voltage / Phase / Frequency Amps Additional Amps for
Filter Heater
Number
of Power Cords
Power
Cord Locations
8.0 GPM (30.3 LPM) 1/3 HP 115 / 1 / 60 7 3 Filter
6.7 GPM (25.4 LPM) 1/3 HP 220-230-240 / 1 / 50 3.6 1.5 1
At filter location
Millivolt controls Not required 0 N/A 0 No power cord
115 / 1 / 60 1.7 N/A Fryer Upgrade controls: Solid state,
Digital, Computer, Basket Lift 220-230-240 / 1 / 50 0.9 N/A
1 cord per 4 fryers Default is left
GAS REQUIREMENTS
Models “A” Dim Cook Area
Oil
Capacity
Gas
Input / Hour
Shipping
Weight / Unit
Shipping
Cube
Shipping Dimensions
H x W x L
SG14
15-5/8 in
39.7 cm
14 x 14 x 4 in
35.6 x 35.6 x 10.2 cm
40 - 50 lbs
18 – 23 kg 110,000 BTU
33 kW (CE) / 119 mJ (AuGA)
200 lbs
91 kg
33 ft.³
.93 m³
58 x 22 ½ x 43 ½ in
147.3 x 57.2 x 110.5 cm
SG14R
15-5/8 in
39.7 cm
14 x 14 x 4 in
35.6 x 35.6 x 10.2 cm
40 - 50 lbs
18 – 23 kg 122,000 BTU
36 kW (CE) / 129 mJ (AuGA)
208 lbs
94 kg
33 ft.³
.93 m³
58 x 22 ½ x 43 ½ in
147.3 x 57.2 x 110.5 cm
SG14T
15-5/8 in
39.7 cm
7 x 14 x 4 in/tank
17.8 x 35.6 x 10.2 cm/tank
20-25 lbs/tank
9-11.5 kg/tank
50,000 BTU/tank
15 kW (CE) / 50 mJ (AuGA)/ tank
230 lbs
104 kg
33 ft.³
.93 m³
58 x 22 ½ x 43 ½ in
147.3 x 57.2 x 110.5 cm
SG18
19-5/8 in
49.8 cm
18 x 18 x 4 ~ 4 ¾ in
45.7 x 45.7 x 10.2 ~12.1
cm
70-90 lbs
32–41 kg 140,000 BTU
40 kW (CE) / 145 mJ ((AuGA)
226 lbs
103 kg
33 ft.³
.93 m³
58 x 22 ½ x 43 ½ in
147.3 x 57.2 x 110.5 cm
SGBNB14
15-5/8 in
39.7 cm
14 ½ x 24 ½ x 4-5/8 in
36.8 x 62.2 x 11.9 cm
N/A
N/A
130 lbs
59 kg
33 ft.³
.93 m³
58 x 22 ½ x 43 ½ in
147.3 x 57.2 x 110.5 cm
SGBNB18
19-5/8 in
49.8 cm
18 ½ x 24 ½ x 4-5/8 in
47 x 62.2 x 11.9 cm N/A N/A
150 lbs
68 kg
33 ft.³
.93 m³
58 x 22 ½ x 43 ½ in
147.3 x 57.2 x 110.5 cm
Filter N/A N/A
95 lbs
43 kg N/A
125 lbs / 57 kg
Add 20 lbs (9
kg) per fryer
position
N/A
Ships with
fryer
N/A
SHORT FORM SPECIFICATION
Provide Pitco FD (Filter Drawer) Solstice filter system. Drain line shall be 3” (7.6 cm) diameter with a swivel drain spout for oil disposal. Filter pickup assembly shall have handles
and utilize envelope type filter paper with 500 sq. inches (3,226 sq. cm) of filter area. Filter pump shall pump 8 GPM, 60 Hz (25.4 LPM, 50 Hz). Filter piping to be self-aligning for
easy assembly. Filter lid shall be attached to the cabinet for ease of use. Filter pan shall have front stabilizer legs and rear rigid casters for portability. Provide accessories as
follows:
TYPICAL APPLICATIONS
Space saving filter capable of filtering heavy to light breaded products fast and conveniently.