Philips CID3692 - Manual (Page 28)

28
11 Product
information
Note
Product information is subject to change •
without prior notice.
General
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance 4 - 8
Maximum power
output 50 W x 4 channels
Continuous power
output 24 W x 4 channels (4
10% T.H.D.)
Pre-Amp output
voltage 2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
Subwoofer output
voltage 2.0 V (CD play mode,
61 Hz, 0 dB, 10 k
load)
Aux-in level 500 mV
Dimensions
(W x H x D)
228.4 x 161.5 x 186 mm
Weight (main unit) 2.3 kg
Disc player
System DVD / CD audio /
MP3 system
Frequency response 20 Hz - 20k Hz
Signal/noise ratio >75dB
Total harmonic
distortion Less than 1%
Channel separation >55dB
Video signal format NTSC only
Video output 1 +/- 0.2V
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A)
4
Replace the fuse.
Note
If the fuse gets damaged immediately after it •
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
EN