Printek FormsPro 4300 - Manual (Page 52)

Advanced Control Panel Features
Page A-2
Function Possible Values Description
Ribbon Life: 15*, 5 - 30 Sets the number of characters to be
printed before the “Change
Ribbon” message is displayed.
For more information, see the
chapter on “Using Special
Features”.
Paper Cutter: Yes or No* Sets whether or not the optional
FormsCutter is installed.
Imager: Yes or No* Sets whether the Imager or Imager
Plus is installed.
Translation: Off* or On This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Free Format: Off* or On This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Terminator: LF* or CR This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Ignore Char: Off* or On This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Zero: Normal or Slashed* This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Ignore Col 1: Yes or No* This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.
Control Char: ^*, ~, !, ?, ;, ', |, or \ This function is only available
when an Imager option is installed.
For more information, refer to the
Imager manual.