Philips SBC RU 240 - Manual (Page 3)

Try other shift/key combinations on your equipment to
discover which functions are available.
Remember that you can’t get access to additional functions if
these functions were not available on the original remote
control of your equipment!
To operate menu control.
To confirm your selection.
VCR
Rewind
Record
Stop
Play
Forward
Pause
SET-UP FOR USE
A d v i c e
Carefully read the complete procedure before starting!
Your equipment is a Philips brand:
1
Press the mode key for the device (TV, VCR, SAT or AUX)
you want to operate.
2
Press the power key to test.
– The green indicator LED lights up to confirm transmission
C h e c k
Press a few keys to check correct response.
Your equipment is of another brand, or your
equipment is a Philips brand, but not all keys
respond correctly:
1
Press the mode key for the device (TV, VCR, SAT or AUX)
you want to operate.
2
Look up the brand name of the device you want to
operate in the code list.
Make sure you choose the correct code list for your device!
3
Make sure the device is switched on.
4
Press and hold keys 1 and 3 simultaneously - for about
three seconds- until the green LED lights up. (Release the
keys: the green LED should stay on)
Instructions for use
3
English
w