Led display & button – Planet Technology VIP-156PE User Manual
Page 10
10
LED Display & Button
1 PC
RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable
2 LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
The LAN interface also can be connected with 802.3af PoE
switch or converter for power supply (VIP-156PE)
3 12V
DC
12V DC Power input outlet
4 Reset
Reset to the factory default setting
5 LINE
PSTN relay when machine power lost (VIP-158)
. Press RESET
button on rear panel over 5 seconds will reset the VoIP Phone
Adapter to factory default value. (Except speed dial and
call forward settings)
Í
Note
LED Indicators
Descriptions
PWR
Power is supplied to the gateway.
STATUS
The Status LED will be flashing when the machine is operational
LNK/ACT
OFF: the gateway is connected to LAN at 10Mb/s.
ON: the gateway is connected to LAN at 100Mb/s.
RING
OFF: the phone is idle.
ON: the phone is in use (offhook).
Blinking: the phone is ringing.