Philips LTC 3963/51 - Manual (Page 62)

29
PHILIPS LTC3963/61 (E) QR31808
SPECIFICATIONS
Video Cassette: VHS type
Recording: Rotary two-head helical scan azimuth recording
Tape Speed: 11.1 mm/sec. (06 mode)
Tape Width: 12.7 mm
Operation Temperature: 5°C to 40°C
Video: NTSC color and EIA standard
Recording Lengths: 06, 18, 30, 48, 72, 120, 168, 240 hours and ONE SHOT (00 mode)
Video Input: 1 Vp-p 75 ohm unbalanced
Video Output: 1 Vp-p 75 ohm unbalanced
S/N Ratio (Video): More than 42 dB (06 mode)
S/N Ratio (Audio): More than 40 dB (06 mode)
Horizontal Resolution: Color: 300 lines (06 mode)
Monochrome: 350 lines (06 mode)
Audio Input: –8 dBm 50 Kohm unbalanced
Audio Output: –9 dBm 600 ohm unbalanced
Audio Frequency Range: 100 Hz to 5 kHz (06 mode)
Power: AC 120V, 60 Hz, grounding type 3 prong AC plug
Power Consumption: 22W
Cabinet Size: 435 mm (W) ϫ 94 mm (H) ϫ 366 mm (D)
17-1/8”(W) ϫ 3-11/16”(H) ϫ 14-7/16”(D)
Weight: Approx. 6.2 kg (13.7 lbs)
* Design and specifications are subject to change without notice.
Maintenance
Two periodic maintenance steps are recommended
to insure the peak performance of this product.
1. Periodically make a careful observation of the
quality of the playback video. If there are excess-
ive dropouts (noise specks) across the video pic-
ture, and the TRACKING control does not clear
the picture, then head cleaning may be necess-
ary. Obtain a high quality head cleaning kit, and
follow the directions carefully. The length of
time between cleaning depends on the amount
of airborne contaminates around the tape
recorder and/or cassette.
2. The unit should be inspected every 3500 hours of
continuous usage by the dealer from whom the
recorder was purchased.