Philips LTC 3963/51 - Manual (Page 53)

20
PHILIPS LTC3963/61 (E) QR31808
ALARM MEMORY RECALL AND RESET
The VCR signals that an alarm has occurred by
flashing the ALARM indicator. If a power loss has
occurred, “PL” will appear in the first line of the
FULL type TIME/DATE display.
To recall the ALARM display:
1. Press the PROGRAM button until the ALARM
MEMORY display appears on the monitor.
2. Log the time/date information from the ALARM
memory.
To reset the ALARM memory:
• When the ALARM RESET button is pressed once,
if “PL” is flashing, “PL” will disappear. Press the
button again to clear the ALARM memory.
• When “PL” is not flashing, press the ALARM
RESET button once to clear the ALARM memory.
ALARM MEMORY Display Format Description
LARM M M
1
A 00 A
2
3
4
5
6
7
8
9
ORY E ❲ ❳
Displays the number of alarm
inputs that have occurred.
Counts up to 99 inputs. ALARM COUNT :
ALARM MEMORY:
1:
Displays the date/time of the first alarm recording.
2~9: Displays the 8 dates/times of the last alarms to have
occurred including the last alarm recording.