Philips T930 - Manual (Page 8)

11. ENGLISH 10. ENGLISH
C
2 Push the Pop-Up Precision Trimmer
upwards. When the Trimmer is switched
ON, the Pop-Up Precision Trimmer will
start to work right away.
NOTE: The main cutting unit will continue to
work when the Pop-Up Precision Trimmer is used.
C
3 Hold Trimmer in vertical position and
make strokes.
The Pop-Up Precision Trimmer is also suitable for
outlining the edges of the beard, on the neck and
on the cheeks.
C
4 When you have finished using the Pop-Up
Precision Trimmer, push it back into the
Trimmer.
You can now put the Guide Comb Attachment
back on the Trimmer.
5 Turn Trimmer OFF.
Replacing Guide Comb Attachment
On Trimmer
1 Be certain Trimmer is in OFF position.
2 Replace Guide Comb Attachment until it
“clicks” into position. The Guide Comb
Attachment can be placed on Trimmer
only one way. If it does not fit properly,
reverse it.
NOTE: The Zoom Ring can be on any setting
when removing or replacing Attachment.
Trimming Without Guide Comb
Attachment
Remove Guide Comb Attachment if you are:
◗ Defining hair lines
◗ Trimming nape of neck
◗ Removing single, unwanted hairs
1 Be certain Trimmer is in the OFF position.
C
2 Remove the Guide Comb Attachment by
pulling it off the Trimmer.
Never pull off the Guide Comb Attachment by
grasping the flexible top portion. Always pull off
by the bottom part of attachment.
3 Switch the Trimmer on.
C
4 Make well-controlled movements. Touch
the hair lightly with the Trimmer.
Trimming With Pop-Up Precision
Trimmer
◗ For use with moustache, contours and
single hairs.
1 Remove the Guide Comb Attachment.