Philips T930 - Manual (Page 7)

8. ENGLISH 9. ENGLISH
C
4 If a lot of hair has accumulated in the
Guide Comb, remove the Comb
Attachment and blow and/or shake the
hair out of the comb. The selected
trimming length setting will not change
when you do this.
Trimming Length Settings Table
Trimming For “Stubble” Look
C ◗ Be certain Guide Comb is on Trimmer and
use setting #1 to result in a “stubble” look.
Trimming with ACU•CONTROL
Guide Comb Attachment
◗ Guide Comb Attachment must be on Trimmer
in order to use Zoom Ring.
C
1 Turn the Zoom Ring to the desired
trimming length setting (see table).The
setting will appear in the window below
the Zoom Ring.
◗ If you are trimming for the first time, start by
using the maximum trimming length setting
#9 to prevent accidentally trimming hairs too
short.As you become familiar with the
settings, adjust Zoom Ring to desired
trimming length. Zoom Ring will “click” into
position at each setting.
2 Switch the Trimmer ON.
C
3 To trim in the most effective way, move
the Trimmer against the direction of hair
growth. Make sure the surface of the
Guide Comb always stays in contact with
the skin.
NOTE: Since all hairs do not grow in the same
direction, you may want to try different trimming
positions (i.e., upwards, downwards, or across).
Practice is best for optimum results.
9
9
#1 Stubble Length or Closely Cropped .06 in./1.5 mm
#2 Short .1 in./2.5 mm
#3 .16 in./4 mm
#4 .22 in./5.5 mm
#5 Medium .3 in./7.5 mm
#6 .38 in./9.5 mm
#7 .48 in./12 mm
#8 .6 in./15 mm
#9 Long .72 in./18 mm
1