Philips D750 - Manual (Page 24)

40 A – Telephone operation: 5 Set-up menu
Tone caller volume ..................................6
Tone caller sequence ..............................5
Tone caller melody ..................................1
Display contrast.......................................3
Charge counter...................................n. c.
Factor .................................................0.12
Charge display ...................................units
Currency .............................................n. c.
Charge accounts ...................................on
Account names ..................................n. c.
Account amounts ...............................n. c.
Account codes. c.
External diversion..................................on
Forwarding to pager..............................off
Telephone number for forwarding
to pager ..............................................n. c. Answering machine ..............................off
Operating mode ..........................n. c.
Text recordings............................n. c.
VIP function ...................................off .
VIP code .............................................n. c.
ADAD operation.............................off
ADAD tel. number.......................n. c.
Automatic listening-in ....................on
Room functions .............................off
Switch on delay .....................3rd ring
Timer..............................................off
Times for timer ............................n. c.
Recording ............................unlimited
Message texts....................................n. c.
Leave message .....................................on
Settings after
reset
(n. c. = no change)
- - - - Enter PIN
-
Select connection type: simple, standard- or comfort -
-
Select additional ISDN features:
• External diversion (only with simple or standard connection).
• Call charge display (only with simple or standard connection).
• Changeover of identification for outgoing calls
• Changeover of identification for incoming calls
• Sending messages
• Intercept
• Call Diversion
• Transfer connection
Activate feature for use (” ”) or deactivates (” ”)
Complete setting changes - Store
5.12 Entering connection type and additional features
You can change the set connection type of your ISDN connection (simple,
comfort, standard). After that, all the additional features that you have
ordered have to be activated or deactivated, so that they can be used.
Deactivation is only offered if a feature is not already included in the connec-
tion type.
Display of the recording capacity
With the answering device switched on, you have the following display with
the telephone in idle condition (instead of the date/time display):
”ADD”: Number of calls received. ”REC”: Number of messages recorded
since the last time the answering device was switched on.
”REST”: Remaining recording capacity in minutes and seconds.
41
Functions are active when the corresponding symbol is visible in the display:
1. You can see at a glance which announcements are activated:
1 = Announcement 1, E = Closing announcement or 2 = Announcement 2.
2. ADAD function
3. Timer
Displays for the answering device
4
7
1 2 3
5 6
A
Symbols for answering device operation
2 E 1
Answering device is
active.
Idle condition
Indicates that an info text is
there for you.
A Lamp for key on/off
• Lamp lights up: Answering device is switched on and ready.
• Lamp is off: Answering device is switched off.
1.1 Answering device controls
Keys and lamps (LEDs) of the answering device
B – Answering device: 1 Start up
Switch on/off
Playback new messages
Function key ”F” (menu) F
A B
B Lamp for playback key
• Lamp lights up: New messages
were recorded. Lamp goes out again,
when all new messages have been heard.