Philips D750 User Manual

Page 14

3.6

Parking

You can “park” a call. The connection still remains.

There are two ways to resume the call:

1. You pull the plug of the telephone at the telephone connection socket in

order to plug it into another socket (of the same multi-device line). You
can then resume the call there.

2. You can also resume the call at another SmartLine D750 operating at the

same ISDN line.

A – Telephone operation:

4 Comfort functions

3.4

Brokering

You can set up a 2nd call during a telephone call so that you can talk
alternately with both of the other parties (= brokering). During brokering, the
party that you are not talking to at that moment is put ”on hold”. He/she
cannot hear the other conversation.

You are in the middle of a telephone call:

Dial telephone number -

When you are connected with

the 2nd party:

By repeatedly pressing the consultation key, you

can switch between the two connections.

End brokering:

press disconnect key

You are reconnected with the party you previously put on hold

Note

3.5

Conference

You can set up a 2nd call during a telephone call so that you can
subsequently talk with both parties at the same time. For this, the ISDN
function ”three-party conference” must be available for your line.

You are in the middle of a telephone call:

If one of the parties you are talking to ends the call, you remain connected
with the other one.

Dial tel. number -

When you are connected with the 2nd

party:

end conference:

A – Telephone operation:

3 Telephoning: During a call

Viewing the call list / deleting an entry

If list entries are available,

is displayed in idle condition:

Viewing the list

Deleting an entry

4.1

Call list

Certain calls with transfer of the telephone number can be automatically
stored in the call list:
1. Not accepted calls (also applies when the capacity of the

answering device has been reached).

2. Camp-on busy calls which were refused.

A maximum of 10 calls are stored along with telephone number and the
message sent. With more than 10 calls the oldest entry is replaced by the
next incoming call.

(

)

- display of the last caller

select input

read

: date, time, number of calls

Select display of a Message (if present), or called MSN

Confirm

Or:

Confirm erase

The parking period must not exceed 3 minutes.
Resumption of the call can also be performed without previously lifting the
handset. The unit then automatically switches hands-free operation on.

Parking a call

You are in the middle of a call (

)

You can input a code (maximum 2 digits) for the connection .

The input is, however, not necessary.

Confirm storage

You can resume the call connection within 3 minutes.

Resuming the call

Notes

– (

)

–

Only if parking was performed using a code number:

Enter code (maximum 2 digits) ,

Confirm storage