Peg-Perego Adjustable Base - Manual (Page 15)

• IMPORTANT: read the instructions carefully before
use. Save the instructions for future reference.
• PEG PEREGO reserves the right to make any
necessary changes or improvements to the products
shown at any time without notice.
Peg Perego S.p.A. is an ISO 9001 certified
company.
The fact that we are certified provides
a guarantee of our honesty for our
customers, and fosters trust in the
companyʼs way of working.
CUSTOMER SERVICE
If parts of the model are accidentally lost or damaged,
use only original Peg Perego spare parts. Contact
the Peg Perego Customer Service for all repair work,
replacements, information about products, and sale of
original spare parts and accessories, at the following:
tel.: 0039-039-60.88.213
fax: 0039-039-33.09.992
e-mail: [email protected],
www.pegperego.com
Peg Perego is at the consumer's service, meeting
every need in the best way possible. This is why our
customers' opinions are so important and valuable
to us. We would be very grateful if you would kindly
fill in the CUSTOMER SATISFACTION QUESTIONNAIRE
after using one of our products. You will find the
questionnaire on the Internet at "www.pegperego.
com/SSCo.html.en-UK".
Please note any observations or suggestions you may
have on the questionnaire.
INSTRUCTIONS FOR USE
PRIMO VIAGGIO with ADJUSTABLE BASE
The "Primo Viaggio" car seat has been designed
for Group 0+, or children weighing from 0 - 13
kg. (0 - 12/14 months of age).
The "Primo Viaggio" car seat has a Ganciomatic
system, which allows fastening and removing the
seat from its car base and Peg Perego strollers
and baby carriages, with a simple flick of the
hand.
1• To detach the child car seat from its base, pull
the handle behind the backrest upwards with one
hand while lifting the seat with the other hand.
2• To attach the child car seat, line it up with the
hooks and push downwards with both hands until
the seat clicks into place.
SAFETY BELT
3• To fasten the safety belt, cross the two straps and
click the tabs into the buckle.
4• To loosen the safety belt, press the red button on
the buckle.
5• The child car seat is equipped with three notches
for adjusting the level of the safety belt to match
the child's height. The safety belt should be
neither too high nor too low in relation to the
child's shoulders. In the correct position, the
child's shoulders should be just above the notch.
6• To change the height of the safety belt, loosen
it and slip the straps out of the notches on the
back. Insert the straps into the appropriate
notches for the child's height.
7• To adjust the safety belt to a looser position, slip
a finger into the opening in the seat, and press
the metal button while pulling the straps upwards
with the other hand, as shown in the figure. To
tighten the safety belt so that it fits the child
snuggly, pull the belt towards you, as shown in
the figure. Be careful not to tighten the belt too
much; leave a slight amount of play in the belt.
PADDING
8• A pillow for the child's head, two shoulder pads,
and a protective cushion for the child's legs are
provided with the car seat. Insert the pillow by
slipping the straps through the openings in the
pillow as shown in the figure. Attach the shoulder
pads using the Velcro fasteners.
9• Position the protective leg cushion by slipping the
seat strap with the buckle through the cushion, as
shown in the figure.
REGULATOR HANDLE
10• The car seat regulator handle has four positions.
To incline the seat, press the two buttons on the
handle and simultaneously adjust the seat until it
clicks into the desired position.
Position A: Set the handle to this position when
the child car seat is mounted in the car.
Position B: Set the handle to this position when
carrying the child car seat by hand or while
attaching it to its base, to a stroller, or to a baby
carriage.
Position C: Set the handle to this position to allow
the car seat to rock.
Position D: Set the handle to this position to
prevent the child car seat from rocking.
EN•ENGLISH