Philips DCM250/37 - Manual (Page 23)

EN 23
English
10 Other features
Set the sleep timer
This DCM250 can switch to standby
automatically after a set period of time.
1
When the DCM250 is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated, the
display shows [SLEEP](sleep) .
To deactivate sleep timer
1
Press SLEEP repeatedly until “OFF” is
displayed.
» When sleep timer is deactivated,
[SLEEP](sleep) disappears on the
display.
Set the alarm timer
This DCM250 can be used as an alarm clock.
The DISC, TUNER, USB or iPod is activated to
play at a preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold TIMER.
3
Press CD, USB, TUNER or iPod to select
a source.
4
Press TIMER to confirm.
» The hour digits are displayed and begin
to blink.
5
Press / to set the hour.
6
Press TIMER to confirm.
» The minute digits are displayed and
begin to blink.
7
Press / to set the minute.
8
Press TIMER to confirm.
» The timer is set and activated.
Activate and deactivate the alarm
timer
1
Press TIMER repeatedly to activate or
deactivate the timer.
» If the timer is activated, the display
shows .
» If the timer is deactivated,
disappears on the display.
Note
• If DISC/USB/iPod source is selected and the track
cannot be played, tuner is activated automatically.
Listen to an external device
You can also listen to an external audio device
through this unit.
1
Press AUX to select MP3 link source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack on this unit
• the headphone jack on the device
3
Start to play the device. (See the device
user manual)
Listen through headphone
1
Plug a headphone into the socket on
the unit.