Philips DCM250/37 - Manual (Page 18)

18 EN
7 Play iPod/iPhone
You can enjoy audio/video from iPod/iPhone
through this DCM250.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
• iPod classic, iPod touch, iPod nano, iPod
5th generation (video), iPod with color
display, iPod mini.
• iPhone, iPhone 3G.
Load the iPod/iPhone
1
Remove the screw on the dock.
2
Place the back plate upright.
3
Place the screw in its original position.
• Note: Do not tighten the screw.
4
Place the iPod/iPhone in the dock.
5
Adjust the position of the back plate to fit
the iPod/iPhone securely.
6
When the back plate is in the correct
position, tighten the screw.
» When the DCM250 is connected to
power, the docked iPod/iPhone begins
to charge.
Listen to the iPod/iPhone
1
Ensure that the iPod/iPhone is loaded
correctly.
2
Press iPod to select iPod/iPhone source.
» The connected iPod/iPhone plays
automatically.
• To pause/resume play, press .
• To skip to a track, press / .
• To search during play: press and
hold / , then release to resume
normal play.
• To navigate the menu: press MENU,
press to select, then press
OK to confirm.