Palm CompactFlash 10/100 - Manual (Page 8)

- 6 -
SOFTWARE INSTALLATION FOR
WINDOWS CE 2.0/2.11/3.0
This section describes how to install the
“CompactFlash Ethernet LAN Card” on a Palm-
sized PC, handheld PC based on Windows CE
Version 2.x or later, or on a Pocket PC based on
Windows CE 3.0.
1. Establish a connection between a Windows
CE based PDA/Palm PC and your Host PC,
typically the Host PC runs under
Windows9x/NT.
2. Install “ActiveSync” connection from the
WinCE Services CD to your desktop PC. For
more information, refer to the Online help.
3. Connect the PDA/Palm PC to the Host PC
COM1 or COM2 port with a serial cable.
4. Once the connectiopn between Host PC and
PDA/Palm PC is established, an “Mobile
device” icon will appear inside “My
Computer” folder of your Host PC.
5. Insert Disk “ CompactFlash Ethernet LAN
Card for WinCE”. Running WINCE.EXE
file from floppy to install CompactFlash Size
Ethernet LAN Card drivers.
6. Insert the Compact Card and reset the
PDA/Palm PC thereafter. Then Configure
your Compact LAN Card as follows.
7. Doble click on “Network”, select
“property” and choose “Obtain an IP
address through DHCP sever”. At this time,
you should see “CompactFlash Size Ethernet