PYLE Audio PLVW20T - Manual (Page 16)

15
Adjusting the sound
The tuner system permits you to adjust many viewing
parameters easily. These are:
.
Audio Mute: Pressing the MUTE button will disable the audio
output, and will display "MUTE" on the upper right corner of
the monitor screen. To cancel the muting function, press MUTE
again.
Please note that if you are using FM Modulation to provide audio signal from the
tuner to you car radio, applying the mute function will also mute the audio portion
of the signal delivered by the transmitter but not the tuner's output carrier signal.
This may result in noise on your car radio.
Providing A/V audio to your car radio
This system offers you two ways of playing the A/V audio through your car radio
system. If your radio has AUX line-level inputs, you can attach the A/V Audio
output connectors to these inputs with RCA-RCA interconnect cables.
If your car radio lacks these AUX line level inputs, your other option is to use the
tuner's audio transmission ability (described in the next paragraph)to broadcast
the audio signal within your car directly to the radio via FM modulation.
Transmitting audio to your car radio
This tuner system is able to transmit the audio signal to your car radio in the
FM radio spectrum. By tuning your radio to a corresponding channel, you can
listen to the audio from your program source. This function is particularly
important when installing in car whose radio lacks AUX line level inputs.
To use this system tune your car radio from FM 88.1 to FM 99.9 for 20 channels
the on you're A/V audio source.
You should be able to hear your AV audio broadcast through your car radio system.
If you do not, go back into the Fm CHANNEL mode of the menu system and
select FM 88.1 MHz to FM 91.9 MHz by channel step 0.2 MHz,,and exit the
menu system.
To stop broadcasting your Video sound thru your car radio, tune the FM Band
to any other channel or enter the menu system and select OFF in the FM
CHANNEL submenu.
TV/CATV TV/AV MUTE POWER
1 2 3 4
5 6 7 8
9 0
FM/AM SETUP
Monitor
DN
- MODE
UP
+ FUNC
VOL CH