Planet Technology LCD MONITOR 170S8FS - Manual (Page 15)

12 13
4.1.3.2.3 Media Converter Chassis
The screen will show out the power status of the WMC-1600R.
V stands for “yes” and X stands for “No”.
Plug in: indicates if Power 1 or 2 was plugged in or not.
Power Fail: indicates if the Power 1 or 2 is fail or not.
Fan Fail: indicates if the Fan 1 or 2 is fail or not.
4.1.3.2.4 Media Converters
Indicates the Link, Duplex mode, Speed and Fail status of each media converter.
4.1.3.2.5 Media Converters Setting
This screen is to set the Device function of LLCF and Link Enable; the Media 1 LLR
function, Auto-Negotiation, Speed, Duplex Mode, Flow Control and Link Enable; the Media
2 LLR function, Auto-Negotiation, Duplex mode and Link Enable.
The “*” in the screen stands for N/A (not available), and the management interface will
detect if the slot has the function in it and will let you set the function exist on the media
converter slot.
Select the slot and press the space bar button to choose which function to open up.