Pride Mobility 1400 - Manual (Page 20)

20 www.pridemobility.com Go-Chair
INITIAL ASSEMBLY
Your Go-Chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 8 details those parts of the Go-Chair that are designed to
be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments. There are two hex keys provided for use with controller installation and adjustment and foot
platform adjustment.
I V . A S S E M B L Y / D I S A S S E M B L Y
ARMREST WIDTH
ADJUSTMENT
Figure 8. Go-Chair Assembly View
FOOT PLATFORM DEPTH ADJUSTMENT
BATTERY REPLACEMENT
CONTROLLER
POSITION
SEAT HEIGHT
ADJUSTMENT
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the travel chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.
SEAT INSTALLATION