Panasonic KX TG2382PW - Manual (Page 57)

57
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by
direct commands instead of using the voice menu. To end the remote
operation, hang up anytime.
Direct commands
NEW MESSAGE PLAYBACK
•Only new messages are
played back.
ALL MESSAGE PLAYBACK
•All messages are played back.
REPEAT (During playback)
•The current message is
repeated.
•If you press within 5 seconds
of playback, the previous
message will be played.
SKIP (During playback)
•The current message is
skipped. The next message is
played.
STOP
•Operation is stopped
temporarily.
•To resume operation, enter a
direct command within 15
seconds, or the voice menu
will start (p. 56).
(4)
(5)
(1)
(2)
(9)
ERASING A SPECIFIC
MESSAGE
(During playback)
•The current message is
erased.
•A short beep will sound
and the next message will
be played.
ERASING ALL MESSAGES
•All recorded messages are
erased.
•A long beep sounds, and
“No messages” is heard.
ANSWERING SYSTEM OFF
•The unit hangs up and will
not answer calls until
turned on again
(p. 49, 53, see below).
(*)(4)
(*)(5)
(0)
Turning on the Answering System
Call your unit and wait for 15 rings.
•The unit will answer and the greeting message will be played.
•The Answering System will be turned on. Hang up or enter the remote code for
other options.
•When turning on the Answering System using a rotary or pulse service telephone,
you cannot enter the remote code for other options.
Skipping the greeting message
After calling your unit, press
(*)
during the greeting message.
•The unit skips the rest of the greeting message and you can start recording your
message after the long beep.