Panasonic KX TG2382PW - Manual (Page 15)

15
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Date and Time
“ ” flashes on the base unit display if the clock has
not been set. The clock needs adjusting.
Voice Day/Time Stamp: During playback, a
synthesized voice will announce the day and time
that each message was recorded.
Make sure the unit is not being used and the handset is lifted off the base unit.
1 Press (MUTE/FUNCTION) .
2 Scroll to “Date and time” by pressing Ö
or Ñ .
3 Press á .
4 Enter the year, and month and day using
4-digit numbers. (Ex. To set Aug. 7, 2003,
enter “2003” and “0807”.)
•If you enter a wrong number, press Ü or á
to move the cursor to the incorrect number.
Enter the correct number.
5 Press Ö (Next key).
•If 3 beeps sound, the setting is not correct.
Enter the correct number.
6
#Enter the time (hour and minute) using
a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
$Select “AM” or “PM” by pressing (*) .
7 Press
Ö
(Next key).
•If you want to change the setting, press Ñ
(Edit key) to reach the desired display and
change it.
8 Press á (Save key).
•A beep sounds and the clock starts
working.
•To exit the programming mode, press
(OFF).
•You can exit the programming mode any time by pressing (OFF).
If a power failure occurs, the
time may be shifted. When
“
” flashes on the base unit
display, adjust the date/time.
Ringer setting
H
Date and time
Initial set
Date:2002.01.01
Set date=0-9
IH
G
=Next
Date:2003.08.07
Set date=0-9
IH
G
=Next
Time:12:00 AM
Set time=0-9
IH
=AM/PM
G
=Next
Date:2003.08.07
Time:09:30 PM
F
=Edit
H
=Save
Base unit display