Ts-d6902r, Ts-d1702r, Ts-d1602r – Pioneer DEH-P7150UB User Manual
Page 53: Ts-d1302r, Ts-d1002r
53
Spe
a
k
e
r
s
TS-D6902R Cross Section
Rigid and Light Weight Cone
Dual-layer IMX™ (Injection Molded Matrix)
Aramid/Basalt fiber composite cone
Lower Crossover Frequency
Passive crossover (woofer: –6 dB/tweeter: –12 dB)
Rear chamber
Low Distortion
Light weight soft-dome diaphragm
High-power neodymium tweeter magnet
Thick woofer basket
Large-sized woofer magnet
TS-D1702R
TS-D1302R
TS-D1002R
• 6" × 9" (16 cm × 24 cm) woofer/28 mm soft-dome tweeter
• Dual-layer IMX™ (Injection Molded Matrix) Aramid/Basalt fiber composite cone
• Large-sized woofer magnet
• Butyl rubber surround for smoother response
• Glass-imide voice coil bobbin
• Extended pole yoke design
• Thick woofer basket for lower distortion
• Light weight soft-dome tweeter with neodymium magnet and magnetic fluid
• Light weight copper-clad aluminum voice coil wire for tweeter
• Wave guides for dispersion control
• Rear chamber for lower crossover frequency
• Lowered tweeter protrusion for wider installation coverage
• High-quality built-in crossover design (LPF: –6 dB/oct., HPF: –12 dB/oct.)
• Maximum input: 360 W
• Nominal input: 80 W
• 17 cm woofer/28 mm soft-dome tweeter
• Extended pole yoke design
• High-quality built-in crossover design (LPF: –6 dB/oct., HPF: –12 dB/oct.)
• Rear chamber for lower crossover frequency
• Thick woofer basket for lower distortion
• Maximum input: 280 W
• Nominal input: 60 W
• 10 cm woofer/18 mm soft-dome tweeter
• Rear chamber for lower crossover frequency
• Maximum input: 110 W
• Nominal input: 25 W
• 13 cm woofer/18 mm soft-dome tweeter
• Rear chamber for lower crossover frequency
• Maximum input: 180 W
• Nominal input: 35 W
• 16 cm woofer/28 mm soft-dome tweeter
• Extended pole yoke design
• High-quality built-in crossover design (LPF: –6 dB/oct., HPF: –12 dB/oct.)
• Rear chamber for lower crossover frequency
• Thick woofer basket for lower distortion
• Maximum input: 260 W
• Nominal input: 60 W
TS-D1602R
Common Features
• Dual-layer IMX™ (Injection Molded Matrix) Aramid/Basalt fiber composite cone
• Butyl rubber surround for smoother response
• Glass-imide voice coil bobbin
• Single conex damper
• Heat-resistant metal frame with punching hole
• Light weight soft-dome tweeter with neodymium magnet and magnetic fluid
• Wave guides for dispersion control
• Lowered tweeter protrusion for wider installation coverage
TS-D6902R
6" × 9" 2-Way Speaker
360 W Max.
TS-D1702R
17 cm 2-Way Speaker
280 W Max.
TS-D1602R
16 cm 2-Way Speaker
260 W Max.
TS-D1302R
13 cm 2-Way Speaker
180 W Max.
TS-D1002R
10 cm 2-Way Speaker
110 W Max.