Pioneer DEH-P7150UB - Manual (Page 44)

Amplifiers & Subwoofers
44
Extra-Strong Dust Cap Core with Foamed Acrylic Polymer
Dust caps on the TS-W8102SPL and TS-W5102SPL subwoofers feature a light, durable
heat-resistant foamed acrylic polymer core (between carbon-fiber and glass cloth
layers) that is up to about 36 times
as strong as conventional materials.
The result: greater capacity for extra
sound pressure, stability and power
in bass reproduction.
Dual Ceramic-Coated Voice Coils
Excess heat generated by subwoofers can compromise electrical-handling
performance, but Pioneer uses ceramic-
coated voice coil to double the capacity
of its sub woofers to handle input power
without short-circuiting. No wonder the
Pioneer TS-W5102SPL beat the competition
at 2005, 2006 and 2007 dB Drag Racing events.
Component SPL Subwoofers
* Patent pending
TS-W5102SPL Cross Section
Extended pole yoke
Composite IMPP cone using
interlaced carbon fiber*
Wide-roll, woven aramid fiber
radial rubber surround*
Super aramid
fiber damper*
Precision dual damper
Ceramic-coated voice coils*
Supporting wire*
Triple stack magnets
76 mm pure titanium voice coil former*
Extra-strong dust cap
Overhung surround
(US6782114B2)
Spider ring
Vented damper holder
30 mm thick top plate
ADMG (Aero-Dynamic
Magnetic Gap)
Bottom hold design
Ceramic thermal insulation
Adhesive layer
Electrical insulation
Copper wire
Carbon cloth
Foamed acrylic
polymer
Glass cloth 10
m
m
Common Features
• Composite IMPP cone using interlaced carbon fiber*
• Carbon cloth/foamed acrylic polymer/glass cloth 3-layer rigid
dust cap
• Wide-roll, woven aramid fiber radial rubber surround*
• Overhung surround design*
• High-power handling ceramic-coated voice coil wire*
• Dual 76 mm (3"), high inductance, 6-layer, long voice coils
(DVC) (2 × 2 Ω)
• Titanium voice coil bobbin
• Dual aramid damper with woven tinsel wire and damper ring
• Precision dual aramid dampers
• Huge back plate and extended pole yoke with vented pole
• Huge 30 mm (1.2") thick top plate
• ADMG (Aero-Dynamic Magnetic Gap) design
• Aluminum die-cast one-piece rigid basket with bottom
hold design
• 8-gauge wire terminal * Patent pending
TS-W8102SPL
38 cm (15") Component Competition-Level SPL Subwoofer
8,000 W Max.
TS-W5102SPL
30 cm (12") Component Competition-Level SPL Subwoofer
6,000 W Max.
• Massive triple-stack magnet assembly
(11 kg: 3,700 g × 3/390 oz.: 8 lbs. 20 oz. × 3)
• Massive triple-stack magnet assembly
(9 kg: 3,000 g × 3/320 oz.: 6 lbs. 10 oz. × 3)
To generate resounding bass, the TS-W8102SPL and TS-W5102SPL subwoofers handle
high-power input and extreme sound pressure levels with absolute assurance, thanks
to design and construction durable enough to deliver consistently true, rock-steady
performance, even at extra-high volume throughout marathon listening sessions.
SPL (Sound Pressure Level) Subwoofer
TS-W8102SPL TS-W5102SPL
The pride of a winner takes world-leading DNA
• Maximum input: 8,000 W
• Nominal input: 3,000 W • Maximum input: 6,000 W
• Nominal input: 2,500 W