Palsonic 6850PF - Manual (Page 11)

Turning On/Off
10
Power on
/Standby
Turing On
Insert the Power cord into the wall outlet, press the
Power Switch, the unit goes to STANDBY mode.
Press the CH+/- on the unit, or press any one of the
button, CH+/- or 0-9 buttons on the remote
control to turn it on.
Notes:
If there is no TV input signal, then a blueback
appears. After 10 minutes, the set auto goes to
STANDBY.
Turing Off
Press the Power Switch on the TV set if you want to
cut off the power completely.
If you want to turn off the TV set temporarily,
press the button on the remote control.
Notes:
If you turn off the power, the unit memories the
last status including picture and sound settings and
preset channels. Next time when you turn on, the
unit works in the memorised status.
The TV set can turn off automatically by:
A. Sleep timer function (needs to be set in
advance).
B. OFF timer function (needs to be set in advance).
2
1
2
1