Philips xDV434/19 - Manual (Page 32)

3139 246 16611
English
32
DVD Setup Menu Options
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU .
3
If you select {PERSONAL}, then proceed
to steps
4
~
7
.
➜
The ‘PERSONAL PICTURE SETUP’
menu appears.
Brightness
Contrast
TINT
COLOR
0
0
0
0
Personal Picture Setup
4
Press
3 4 to highlight one of the
following options.
BRIGHTNESS
Increase the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
TINT
Increase the value will darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOUR
Increase the value will enhance the colour
in your picture or vice versa. Choose zero
(0) to balance the colour.
5
Press
1 2 to adjust the setting that best
suit your personal preference.
6
Repeat steps
4
~
5
for adjusting other
colour features.
7
Press OK to confirm.
Switching the YUV/RGB
This setting allows you to toggle the
output of the video signal between RGB
(on scart) and YPbPr (YUV).
1
In ‘VIDEO SETUP PAGE’, press
3 4 to
highlight {COMPONENT}, then press
2.
YUV
Select this for Y Pb Pr connection.
RGB
Select this for Scart connection.
2
Press
3 4 to select a setting, then press
OK to confirm your selection.
Warning:
When the player is set to YPbPr
(YUV), some TV may not properly
synchronise with player on the
SCART connector.
01-39 xDV434_Eng_191 13/04/05, 1:50 PM 32