Philips FAXJET IPF525 - Manual (Page 27)

Settings · Entering the Date and Time 27
EN
9 Settings
Calling Ijet 3 Menu Functions
Press MENU to open the function menu. Page through
[
menu entries. Confirm the selected function with o.
Select further functions using [ or o. Press C to return
to the previous menu level. Press j to close the menu and
return to the starting mode.
Printing the Functions List
Entering the Date and Time
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP .
3 Confirm with o.
4 Confirm DATE AND TIME with o.
5 Select using [ SET DATE/TIME .
6 Confirm with o.
7 Enter the date (two digits each) e.g.
080608
for 08.06.08.
8 Enter the time, e.g. 1400 for 2 pm.
9 Confirm with o.
10 You can exit with j.
Time and Date After a Short Power Failure
Selecting the Language
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION .
3 Confirm with o.
4 Using [ select LANGUAGE .
5 Confirm with o.
6 Use [ to select the desired display language.
7 Confirm with o.
8 You can exit with j.
Selecting the Country
Setting the Country Correctly
Reset When Setting the Country
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION .
3 Confirm with o.
4 Using [ select COUNTRY SET-UP .
5 Confirm with o.
6 Use [ to select the country in which you are operat-
ing the device.
7 Confirm with o.
Entering Name and Fax
Number
Your name and your number are transmitted together with
the date, time and page number. The position of the infor-
mation can be changed.
Entering Name
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION .
3 Confirm with o.
4 Confirm STATION NAME with o.
5 Enter your name. You can enter characters using the
numeric keys (see key labels). Enter special characters
using # or *. For this purpose, press the relevant
key several times until the desired character or special
character appears on the display.
6 Confirm with o.
7 You can exit with j.
Notice
Printing the Functions List
You can print the menu overview using MENU
and 2.
Notice
Format of Time and Date
Select further settings in step 5 using [
DATE FORMAT —Change the date format
HOUR FORMAT —Change the time format (12/
24 clock).
Notice
Time and Date After a Short Power
Failure
If SET DATE/TIME appears in the display,
you must adjust the date and time.
1
Press MENU and confirm using o.
2 Enter the date and time with the numeric keys.
3 Confirm with o.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
CAUTION!
Settings will be Deleted!
When you select a new country, all settings are
reset to the factory defaults for that country.
Saved data remains intact. Check the number
entered for the header.