Peavey 1000 - Manual (Page 4)

PM 1000 Front Panel:
For use with a low impedance microphone or low level source equipped with an XLR connector.
When the switch is in the out position, the microphone loop is bypassed.
Active tone controls that vary the Lo, Mid, and Hi frequencies.
DJ Mic is “live” when the switch is in the “on” position.
Mic 2 is “live” when the switch is in the “on” position.
A mono slider that determines the output level of the second microphone channel.
A mono slider that determines the output level of the microphone channel.
4