Peavey 1000 - Manual (Page 3)

Thank you for purchasing the Peavey Production Mixer professional DJ mixing unit.
When used in accordance with this manual, your new DJ mixer will give years of good service.
Monitor Facility with separate switch for mic in/out
switches on all four phono music inputs
assignable crossfade switches
Eight music inputs (4 stereo RCA inputs)
Selectable program effects loop to add echo, reverb, etc., or more graphic
Separate, selectable mic effects loop common to both mic inputs
Individually-selectable headphone cueing for each music channel
Selectable automatic voice-over
Manual push-to-talk voice-over button
Cueing selector to listen to stereo program output, stereo channel cueing, or
channel cue in right and program output in left
Individually adjustable levels for program and channel cueing facilities
Built-in gooseneck XLR light socket
45 mm heavy-duty (field replaceable) crossfade slider
Power on/off switch with LED indicator
High slew-rate, super low-noise op amps are used throughout the entire mixer’s
circuitry
60 mm high-quality Alps slide faders are used on all channels and master level
control
Level trim controls on all music inputs
Channel assignable/defeatable crossfade facility
The Production Mixer 1000 multi-media entertainment mixer is a brand new addition to
Peavey’s line of premium quality DJ equipment. It is an all-American made, high-quality, rug-
ged, and professional DJ mixer.
rap recording artists, and specialist DJ equipment dealers were closely involved in
active consultancy during and throughout each design stage.
Housed in a 1 x 19” rugged steel chassis, the PM 1000 boasts a truly remarkable
array of much preferred DJ features like: four individual music channels; eight music inputs,
four of which are individually switchable to phono or CD; fully assignable/defeatable
crossfader; three-band EQ on each channel; and built-in gooseneck XLR light socket. Low
impedance, phantom powered front/rear panel-mounted microphones deliver fast, positive
connect and disconnect facilities for the mic; and rear-mounted input is provided for
Hi-Z microphones.
Because vinyl is becoming very difficult to obtain and CDs are playing a much larger part as
the preferred DJ music medium, each phono input on this DJ mixer has an individual slide
switch that changes the input from vinyl to CD (or back again) quickly and easily. Therefore, as
vinyl becomes even more scarce, every phono (record deck) input may also be used for CD
players.