Philips SRM7500 - Manual (Page 5)

SRM7500 - Instructions for Use
5
© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium) SRM7500 - Instructions for Use
The remote initializes and is now ready to be configured as described
below.
Note Leave your PC turned on during the configuration of the remote control.
You still need to set up the connection between the remote and the PC.
Configuring the Remote Control
A wizard on the remote’s screen will guide you through the different
steps of the initial configuration of your SRM7500.
1 Select the language for your instructions on the remote using the
cursor keys and press
.
2 Select Next and press . Make sure the remote is within a range of
6 feet (2 meters) of the PC.
When the connection between the remote and the PC is installed
successfully, a confirmation message appears on the SRM7500 screen
and the MediaControl icon in the taskbar on your PC screen turns
green: .
The name of the PC you want to control with your SRM7500
appears.
3 Confirm that you want to add other devices, like your TV or DVD
player, by selecting Yes and press
.
In doing so, you replace their original remote control with SRM7500.
The installation of 4 devices typically takes up to 20 minutes.
4 Select the device and brand of the device you want to add using the
cursor keys and press
.
The remote searches the database for available code sets.
Press the cover inwards
and lift it up. Place the 3 batteries
into the battery
compartment. Position the cover and
press firmly until you
hear a click.