Philips SRM7500 - Manual (Page 23)

© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium) SRM7500 - Instructions for Use
SRM7500 - Instructions for Use
23
3 Select the device you want to copy the Volume keys to (e.g. DVD or
SAT) and press
.
4 Confirm you want to copy the Volume keys from one device to the
other by selecting Yes and press
.
The Volume keys and Mute key are copied.
5 Select Exit and press to return to the Setup menu.
Full Reset
You can reset the SRM7500 completely, deleting all programmed
devices, activities, learned keys and other settings. After the reset, you
will have to configure your remote again.
1 Select the option Full reset in the Setup menu by using the cursor
keys and press
.
2 Confirm you want to perform a full reset by selecting Yes and
press .
3 Press to reconfirm.
The remote control deletes all settings. When the full reset is ended,
the remote re-initializes.
If you will use the same PC you used before the full reset, you can
start immediately configuring the remote, as described on page 5, just
press .
If you will use a new PC, you need to prepare the PC you would like to
control with the SRM7500, as described on page 4.