2 run the powerpacket encryption utility – Planet Technology PL-101E User Manual

Page 21

Text mode
Original mode

5.2 Run the PowerPacket Encryption Utility

After installing the PowerPacket encryption utility for your PL-101E/U, your computer
desktop will display this icon, Powerline Network Configuration Utility.

Note: Make sure your TCP/IP protocol is set up appropriately on your

computer before running security configuration utility.

Double-click the icon, “Powerline Network Configuration Utility”, on your desktop.
1. Click Next button to continue.

2. All of your PL-101E/U devices on your powerline network must share the same

network password. The password must have between 4 and 24 characters. The
password is case-sensitive. Upper and lower case letters must be used
consistently.

Note: Remember this password. You will need to set this password on

each PL-101E or PL-101U devices on your powerline network.

This manual is related to the following products:

PL-101U