Paxar Pathfinder Ultra Platinum 6039TM - Manual (Page 2)

PRINTER WALL REFERENCE
Pathfinder® Ultra® Silver (6032™) Printer Pathfinder® Ultra® Platinum (6039™) Printer
See the Equipment Manual for more information.
Loading Supplies in Non-Peel Mode
Turn on the printer and put Press the latch buttons and open Open the spring-loaded supply holder.
it into load mode. the supply cover.
6032: Press the Load Key.
6039: Select the supply loading
option from the display
screen.
Or, ask your System
Administrator.
Supply Cover
Latch Buttons
Insert the supply roll so it Feed the supply out the front of the printer, under Close the supply cover and press ESC
feeds from the bottom. the Applicator Roller and above the Label Deflector. or return to the previous menu.
Applicator Roller
Label Deflector
Cleaning Your Printer
NOTE: Always turn off the printer before cleaning.
Platen Roller Pinch and Feed Rollers Printhead Printer Flex Cable
Adhesive
Buildup
Cable
Use a dry, soft-bristle brush. Use a dry, lint-free cloth. Use a cleaning pen or a Use a soft cloth, lightly
soft cloth, lightly moistened moistened with
with 91% Isopropyl Alcohol. 91% Isopropyl Alcohol.
Platinum Display Screen On-Demand Sensor Scanner Window Black Mark Sensor
Display
Screen
On-Demand
Sensor
Pull the
Label Deflector
down.
Use a soft cloth, lightly Use a dry cotton swab. Use a soft cloth, lightly
moistened with water. moistened with water. Use a dry cotton swab.
2 3
6 4
1
5
TC603XWC Rev. AD 1/08 ©2003 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All Rights Reserved.