Philips SCD589 - Manual (Page 23)

Environmental information
Disposal of your old product
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
Please inform yourself about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste.The
correct disposal of your old product will help prevent potential
negative consequences for the environment and human health.
Factory initialization mode
In this mode both units can be reset to the default factory
settings. Factory initialization can be used if problems occur
which can not be solved by following the suggestions in the
chapter ‘Troubleshooting’. Resetting must be done separately for
each unit.
1 Press and hold the On/Off (y) button (A-1, B-6) for
2 seconds to switch on the unit.
2 When the LINK light (A-3, B-3) on the unit lights up,
immediately press and hold the volume – button (A-4, B-10).
> The unit has now been reset to the default factory settings.
Important information
23
EN