Philips SCD589 - Manual (Page 16)

Most functions of your baby monitor can be operated using the
local buttons on the units.The functions described below can only
be operated remotely using the parent unit menu.The nightlight
and lullaby functions can be operated using both menu and local
keys.
Note: All buttons mentioned are located on the parent unit.
Menu operation - General explanation
1 Press the MENU button (B-2) to open the menu.
> The first menu option appears on the display.
2 Use the – and + buttons (B-10) to select the desired menu
option.
3 Press the OK button (B-7) to confirm your selection.
> J appears on the display.
4 Press the MENU button (B-2) again to exit the menu.
Note: Always press the buttons MENU (B-2), – and + (B-10)
and OK (B-7) briefly.
Switching night light on/off
• Select K or L, using – and +
(B-10). Confirm by pressing OK (B-7).
16
EN
Menu options