Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 20)

Cardio Theater Integrated Bracket Assembly Instructions
page 20
4
Install the Bracket Assembly
1. Remove the bracket cover.
Loosen the bolts on the pivot tube using a
⁷⁄₃₂-inch hex key. Pull the bracket cover away
from the assembly. Set it aside.
2. Feed the coaxial/power cable with its three
connectors through the bracket assembly.
Ask your assistant to hold the bracket assem-
bly near the upright support while you slide the
coaxial/power cable and its three connectors
(coaxial, power, and DVD) through the bracket
assembly tube.
Bracket cover
Bracket
assembly
Bracket cover
1
2
Install the Bracket
Assembly
Coaxial/power
cable with three
connectors