Precor C846i - Manual

This addendum accompanies the C842 or C846 Owner’s Manual
and describes the changes that have occurred with the introduction
of the C846i product.
On the C846i, new labels appear on the display, but do not change
the functionality of the unit. The owner’s manual uses the words
course and course selection, while the labels display programs and
program selection. To lessen confusion, please remember that
wherever you come across the word “course” in the owner’s
manual, you need to replace it with the word “program.”
OPTIONAL POWER ADAPTER
With the C842 or C846i product, if you choose to purchase the
optional power adapter, you must also purchase the internal cable
kit. This kit supplies a cable, bracket and fasteners that allow the
power adapter to connect to the lower electronics board.
CAUTION: The internal cable kit requires installation by an
authorized service person. Do not attempt installation on
your own as you could void the Precor limited warranty.
If you need assistance, please see Obtaining Service in your
owner’s manual.
SEAT ADJUSTMENT
On the C846i and C842, you can adjust the seat tilt by taking the
following steps:
1. Loosen the nut beneath the seat using a 17 mm (
¹¹⁄₁₆
-inch)
box-end wrench or crescent wrench. Refer to Diagram 1.
Diagram 1 Loosen nut to
adjust seat tilt.
P/N 47563-101
February 27, 2004
Seat
Nut
Wrench
Seat Post
C842
C846i
Owner’s Manual Addendum