Philips HTS3373 User Manual
Page 27
27
Search and store radio stations
individually
1
Press
RADIO .
2
Press
/ .
It starts searching until a radio station
»
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To À netune the radio frequency,
•
press / .
4
Press
PROGRAM .
The preset station number blinks.
»
If no action is carried out within 20
»
seconds after the above step, it exits
the preset mode.
5
Press
/ (or the Numeric buttons ) to
select a preset number to store.
6
Press
PROGRAM to conÀ rm.
Change tuning grid
In some countries, the frequency step between
adjacent channels in FM band is 50 kHz or
100 kHz.
1
Press
RADIO .
2
Press
.
3
Press and hold
until ‘GRID 9’ or
‘GRID 10’ is displayed.
‘GRID 9’ for 50 kHz and ‘GRID 10’ for
»
100 kHz.
Listen to radio
1
Press
RADIO .
2
Use the remote control to control the
radio.
Button
Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for
•
other radio stations remain
unchanged.
Reinstall all the radio stations
1
Press
RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are
»
replaced.
Note
Check the radio antenna connection if no
•
stereo signal is detected or less than 5 stations
are detected during radio installation.
English
EN