Philips HTS3373 - Manual (Page 14)

14
Connect USB device
1
Connect the USB device to USB jack
on this Home Theater System.
Note
This Home Theater System can only play/view •
MP3, WMA, DivX (Ultra) or JPEG À les that are
stored on such devices.
Press
• USB to access the content and play the
À les.
Connect power cord
Warning
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Before any connection to power outlet, set the
•
voltage selector (at the rear or bottom of this
product) to the local power line voltage.
1
Connect the power cord to the power
outlet when all the required connections
are done.
The product is ready to be set up for
»
use.
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘OPTI IN’ is displayed on the
display panel.
Connect portable media player
1
Connect a 3.5mm stereo audio cable (not
supplied) to the MP3 LINK jack on this
Home Theater System and the phone
jack on the portable media player (such as
MP3 player).
Note
To listen to the audio output from this •
connection, press AUDIO SOURCE
repeatedly until ‘MP3 LINK’ is displayed on the
display panel.
MP3
EN