Removing clogs, Feature chart – Panasonic MC-V7388 User Manual
Page 42
- 11 -
Power
Vac Gauge
Headlight
Cord Length
Bare Floor
120V AC(60Hz)
Yes
Yes
35 Ft
Yes
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje
Indicador de
Luz
Extensión
Uso sin
aspiración
de cordón
alfombra
12.0 A/12,0 A
Si
Si
10,6 m (35pi)
Si
Alimentation
Indicateur de
Dispositif
Longueur du
Position
sac plein
d’éclairage
cordon plancher
120 V c.a. (60 Hz)
Oui
Oui
10,6 m (35 pi)
Oui
- 42 -
Hose
Manguera
Tuyau
Short Hose
Manguera
corta
Tuyau
court
Suction
Inlet Cover
Cubierta de
aspiración
Couvercle
de l’entrée
d’aspiration
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢
➢ Unplug vacuum.
➢
➢ Pull open suction inlet cover and
check for clogging.
➢
➢ Disconnect wand from short hose
and check the wand and hose.
➢
➢ Plug in vacuum cleaner and turn on.
➢
➢ Disconnect wand and stretch hose in
and out to remove clog.
➢
➢ If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢
➢ Turn vacuum over and inspect
agitator area for clogs.