Configuring basic settings, Appearance of time and date, Configuring basic settings –2 – Polycom 550 User Manual

Page 22: Time and date –2

User Guide SoundPoint IP 550 Phone

2 - 2

Configuring Basic Settings

You can configure the following basic settings through use of

• The appearance of the time and date

• Display contrast

• Backlight intensity

• Headset Memory Mode

• Headset hookswitch selection

• Ring type

• Language support (localization)

• Graphic display background pattern
You can mute the microphone and adjust the volume using separate keys.

Appearance of Time and Date

The time and date appears on the graphic display of the SoundPoint IP 550

phone. If the phone cannot obtain a time and date from the call server, the

display will flash. Contact your system administrator if either the time or date

is incorrect.
You have control over the format of the time and date display and can turn the

display of time and date off. The default time and date format appears in the

following figure.

To configure the time and date:

Press .

Select Settings > Basic > Preferences > Time & Date.

Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.